Technical Assistance

Problem: Product is leaking air.

Possible reasons and solutions . . .
 

1.

Air is leaking from the Air Release Valve. If air is leaking from Air Release Valve, carefully remove the round black plastic gasket inside the Air Release Valve cover. Rinse this gasket in warm water for 10 minutes, then cool and towel dry. Re-insert gasket in the valve cover, making certain that the side of the gasket with the U-shaped groove faces into the cover. Leave valve in open position for approximately 30 minutes. Then close and proceed with inflation instructions.

2.

Gasket has fallen out of Air Release Valve The Air Release Valve on the AeroBed forms a very tight, high compression seal. When the valve is opened - and the seal broken - sometimes the gasket will pop off. If this should happen, re-insert the gasket into the valve cover with the U-shaped groove facing into the cover. The gasket simply rests inside the valve cover.